Ronda
The Nordpeis Ronda is a high, stylish and freestanding fire delivered in ShapeStone. As an accessory, the fire can be filled with heat-retaining stones, ensuring that it provides an even temperature over extended periods.
A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.
A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.
If you want a fire with even and optimal heat emission, PowerStone™ is a good investment. PowerStone™ is a heat-retaining concrete material that Nordpeis has tested and developed since 2004. The stone has a higher heat-retaining effect than traditional soapstone.
In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.
Used together with the fresh air supply, during retrofitting of the fireplace, if there is a need for additional air.
-
Tall and stylish
The Ronda is a tall fire with a good view of the flames.
-
Option for heat retention
The Ronda can be combined with PowerStone for a heat-retaining effect.
-
Placement friendly
The Ronda can be assembled from both the top and the rear and is therefore equally suited to freestanding placement or placement against a wall.
-
Clean burning
All our fires and stoves are clean burning. By switching to a clean-burning fireplace, you will benefit both the environment and your bank balance.
-
Fresh air supply
This product is equipped with a connection pipe that the installer can connect to an external air supply. Modern houses with minimal natural ventilation require an external air supply to ensure that the fireplace burns optimally.
Width: 600 mm
Depth: 600 mm
Efficiency : 79,3 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 5
Log length: 30 cm
Net Weight KG Range: 418 *
*A normal floor will be able to withstand the weight.
