Quadro 1 Basic
The Nordpeis Quadro Basic 1 has a clean and stylish design, with particular emphasis on a maximum view of the flames. The oven can be placed against a straight wall, in the corner or freestanding in the room. Available with higher tops for side assembly or tops featuring PowerStone for a heat-retaining effect.
In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.
Good view of the flames
Attractive insert providing a good view of the flames.
Option for heat retention
Choose a high top with PowerStone for a heat-retaining effect.
Side assembly option
The Quadro Basic can be assembled from the side if an extra top is used for side assembly.
Fresh air is let in through a channel in the upper edge of the glass, flowing evenly down the glass in the hot combustion chamber. The clean air prevents the flue gases making contact with and sooting up the glass. It also helps to control the intensity of the fire.
Fresh air supply
This product is equipped with a connection pipe that the installer can connect to an external air supply. Modern houses with minimal natural ventilation require an external air supply to ensure that the fireplace burns optimally.
Width: 544 mm
Depth: 442 mm
Efficiency : 80 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 6
Log length: 30 cm
Net Weight KG Range: 104 *
*A normal floor will be able to withstand the weight.