• Quadro 3 med to ulike topper for varmelagring

Quadro 3

The Nordpeis Quadro 3 has a clean and stylish design, with particular emphasis on a maximum view of the flames. The oven can be placed against a straight wall, in the corner or freestanding in the room. Available with higher tops for side assembly or tops featuring PowerStone for a heat-retaining effect.

Choose accessories

A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.

The ash solution comprises a tray that is placed above the combustion plates in the fireplace. The tray comes with a handle and the ash can then be easily removed when you want to empty the oven or stove.

In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.

Used together with the fresh air supply, during retrofitting of the fireplace, if there is a need for additional air.

  • Good view of the flames

    Attractive insert providing a good view of the flames.

  • Option for heat retention

    Choose a high top with PowerStone for a heat-retaining effect.

  • Side assembly option

    The Quadro can be assembled from the side if an extra top is used for side assembly.

  • Air flushing

    Fresh air is let in through a channel in the upper edge of the glass, flowing evenly down the glass in the hot combustion chamber. The clean air prevents the flue gases making contact with and sooting up the glass. It also helps to control the intensity of the fire.

  • Fresh air supply

    This product is equipped with a connection pipe that the installer can connect to an external air supply. Modern houses with minimal natural ventilation require an external air supply to ensure that the fireplace burns optimally.

Technical Information
Height: 1356 mm
Width: 544 mm
Depth: 442 mm
Efficiency : 80 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 6
Log length: 30 cm
Net Weight KG Range: 118 *
*A normal floor will be able to withstand the weight.