Odense Exclusive

The Nordpeis Odense Exclusive model comes with external glass, providing a cleaner look and an excellent view of the fire. The hidden air inlet in the base makes this fireplace functional while also ensuring that it still looks elegant. You can choose between the low or high model. Both models come with the option to install an additional firewood store on the side of the fireplace. There are also LED-lights available to install in the base, if you’re looking to make your fireplace unique to you. Installing lighting in the base elevates the fireplace, almost making it look like it’s floating.

Choose accessories

A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.

If you want a fire with even and optimal heat emission, PowerStone™ is a good investment. PowerStone™ is a heat-retaining concrete material that Nordpeis has tested and developed since 2004. The stone has a higher heat-retaining effect than traditional soapstone.

The ash solution comprises a tray that is placed above the combustion plates in the fireplace. The tray comes with a handle and the ash can then be easily removed when you want to empty the oven or stove.

In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.

Used together with the fresh air supply, during retrofitting of the fireplace, if there is a need for additional air.

  • Stylish design

    No visible joints, a clean look and hidden air inlets in the base.

  • Ceiling-high model

    You can choose to install either the low or high model. The high model stretches up to the ceiling, making the fireplace a sculptural addition to your home

  • Flexible placement options

    The Odense Exclusive is a corner fireplace. There are several placement options with this model, as it can also be placed up against a straight wall alongside an additional, decorative firewood store

  • Additional options to add glass and a cold handle

    Neither the external glass nor the cold handle, with its matte soft touch-finish, get hot while the fireplace is in use, making it safer and easier to load the firewood.

  • Unique LED lighting in the base

    There are also LED-lights available to install in the base, if you’re looking to make your fireplace unique to you. Installing lighting in the base elevates the fireplace, almost making it look like it’s floating

Measurements
Technical Information
Height: 1800 mm
Width: 530 mm
Depth: 530 mm
Efficiency : 80 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 6
Log length: 30 cm
Net Weight KG Range: 254 *
*A normal floor will be able to withstand the weight.