S-31A Basic

The Nordpeis S-31A Basic is a small insert with angled glass, which provides a good view of the flames. Our inserts have carefully tested combustion technology, air flushing of the glass and a well-insulated combustion chamber with light Thermotte. All our inserts are clean burning for maximum utilisation of firewood.

Choose accessories

If you want a fire with even and optimal heat emission, PowerStone™ is a good investment. PowerStone™ is a heat-retaining concrete material that Nordpeis has tested and developed since 2004. The stone has a higher heat-retaining effect than traditional soapstone.

The ash solution comprises a tray that is placed above the combustion plates in the fireplace. The tray comes with a handle and the ash can then be easily removed when you want to empty the oven or stove.

In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.

Used together with the fresh air supply, during retrofitting of the fireplace, if there is a need for additional air.

  • Good view of the flames

    Attractive insert providing a good view of the flames.

  • Option for heat retention

    The S-31A can be combined with PowerStone for a heat-retaining effect.

  • Clean burning

    All our inserts are clean burning. By switching to a clean-burning fireplace, you will benefit both the environment and your bank balance.

  • Air flushing

    Fresh air is let in through a channel in the upper edge of the glass, flowing evenly down the glass in the hot combustion chamber. The clean air prevents the flue gases making contact with and sooting up the glass. It also helps to control the intensity of the fire.

  • Fresh air supply

    This product is equipped with a connection pipe that the installer can connect to an external air supply. Modern houses with minimal natural ventilation require an external air supply to ensure that the fireplace burns optimally.

Technical Information
Height: 832 - 845 mm
Width: 387 mm
Depth: 387 mm
Efficiency : 80 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 6
Log length: 30 cm
Net Weight KG Range: 85 *
*A normal floor will be able to withstand the weight.
Documents

Manuals

Annen dokumentasjon

DoP for S31A_Basic_GB.pdf