• Stor varmelagrende peis i moderne design i hytte
  • Stor varmelagrende peis i moderne design
  • Stor varmelagrende peis - stabletegninger

    Kjerne av varmelagrende PowerStone™

Salzburg L Convection

The Nordpeis Salzburg L Convection is a heat-retaining fire with convection. Like our entire Salzburg series, the core of the fire comprises heat-retaining PowerStone. The core has channels that capture the heat and optimise the utilisation of firewood. With just a few heating cycles, the Salzburg provides heat 24/7, giving a really pleasant and effective heating. In addition to heat retention, this fire has convection heating, providing you with full control over the heat in the room. You can quickly heat up a room or choose to completely close the convection heating in order to get the full benefits of heat retention. The Salzburg L Convection can be supplied with additional elements for a higher variant and can also be connected to an external air supply.

Choose accessories

A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.

A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.

A floor plate is obligatory if the floor is made from a combustible material. This floor plate has been designed for this fireplace. Remember that you must always remove any embers that fall onto the floor plate.

In well-insulated houses with minimum natural ventilation, an insufficient external air supply can lead to underpressure in the room in which the fireplace is located. This can result in poor combustion, poor utilisation of firewood and sooting up of the chimney. Thus, in houses with minimum natural ventilation, we recommend fireplaces that can be connected to an external air supply. The fresh air channel should be designed and made ready at the start of the building’s construction.

Used together with the fresh air supply, during retrofitting of the fireplace, if there is a need for additional air.

  • Heat retention with convection

    Like our entire Salzburg series, the core of the fire comprises heat-retaining PowerStone. The Salzburg L Convection Also has convection heating. This gives you total control over the heat in the room.

  • Good view of the flames

    Large and attractive insert providing a good view of the flames.

  • Clean burning

    All our fires and stoves are clean burning. By switching to a clean-burning fireplace, you will benefit both the environment and your bank balance.

  • Additional elements

    Option to build a higher model using an additional element.

  • Fresh air supply

    This product is equipped with a connection pipe that the installer can connect to an external air supply. Modern houses with minimal natural ventilation require an external air supply to ensure that the fireplace burns optimally.

Technical Information
Height: 1740 mm
Width: 800 mm
Depth: 567 mm
Efficiency : 90 %
Smoke pipe dimention (mm): 150
Nominal output (kW): 2
Log length: 40 cm
Net Weight KG Range: 950 *
*Heavier fireplace - this product requires an extra control of how much weight the floor can withstand.
Heat accumulating capacity 100% : 4,4 t
Heat accumulating capacity 50% : 16,7 t
Heat accumulating capacity 25% : 27 t
Heat accumulating capacity (+1) 50% : 16,7 t
Heat accumulating capacity (+1) 100% : 4,4 t
Heat accumulating capacity (+1) 25% : 27 t